WiFi

The WiFi section lets you manage all network connections on the robot — including joining existing networks, configuring the robot’s own access point, and viewing device information.

From the dashboard, tap Settings, then tap WiFi.

[PICTURE: WiFi home screen showing current connection status]

Connection Status

The WiFi home screen shows whether the robot is currently connected to a network or operating as an access point (AP). Current IP addresses are displayed.

Scanning for Networks

Tap Scan to see a list of available WiFi networks. Each entry shows:

  • Network name (SSID)
  • Signal strength indicator

Tap a network to connect to it.

[PICTURE: WiFi scan results with network names and signal bars]

Connecting to a Network

Standard (Personal) Network

  1. Tap Scan and select your network from the list, or tap Manual Connect and type the SSID yourself
  2. Enter the WiFi password when prompted
  3. Tap Connect

[PICTURE: Password entry screen for a selected network]

Enterprise Network

For school or corporate networks that require a username and password (WPA2-Enterprise):

  1. Tap Enterprise Connect
  2. Enter the username, password, and optionally a certificate if required by your network
  3. Tap Connect

Saved Networks

Tap Saved Networks to see a list of networks the robot has connected to before. Tap any entry to view its details or delete it.

Access Point (AP) Mode

The robot can broadcast its own WiFi network so you can connect your laptop directly without needing a router. This is the default mode.

Tap Access Point Config to change:

  • SSID (network name)
  • Password
  • Channel

Tap Save to apply. The robot will restart its AP with the new settings.

[PICTURE: Access Point configuration form with SSID and password fields]

Tap Access Point Status to see the current AP settings and how many devices are connected.

LAN Only Mode

If the robot is connected to a wired Ethernet network and you want to disable WiFi, tap LAN Only. The status screen confirms that WiFi is off and shows the Ethernet IP.

Device Info

Shows the robot’s network information:

  • Hostname
  • WiFi IP address
  • Ethernet IP address (if connected)
  • MAC addresses

This page is useful when you need the robot’s IP address but cannot see the main dashboard.

← Settings